|
DREW MET
POLSKA - PODKARPACKIE
38-420 Korczyna
Wola Komborska 39
tel./fax: 48 13 43 545 39
tel. mobil.: 48 604 975 870
www.maszyny-drewmet.pl
drewmet@maszyny-drewmet.pl
|
|
|
|
Drew Met (Poland) has been present on a market
since 1990, first as a company of woodworking, thanks to the machines
of our own design. Long-term construction experience connected with
quality let us produce small circular frame saws
and double-shaft multiple-blade circular saws.
Many clients are very interested in our products thanks to modern
solutions used in designing of our machines. All of them have a
certificate of The Institute of Advanced Manufacturing Technology,
established in Kraków.
|
|
|
Double-shaft multiple-blade circular saw WD-200/240/M
Circular saw is used for cutting piles of planks
and squares of different thickness. It has the ability to multi-cutting
piles of unlimited width. It can be used in small and big industrial
plants of timber industry.
In order to obtain a large cutting height (180 mm) in the machine,
two rollers are used. Timber stacked one above the other moved towards
each other in a line perpendicular to the axle shafts. Both shafts
are mounted on the saddles that allow positioning the shaft in a
vertical line. This allows use of different diameter saws depending
on the thickness of the cut material. Feed mechanism consists of
three rolls of lower emissions, and the two upper rollers raised
from - all of them have moved from the drive gearmotor using a mechanism
consisting of a gear and chain gear. Adjustable upper pressure rollers
takes place by means of lifting mechanism clamp.
Specifications
- Diameter of circular saws 200 - 300 mm
- Max. thickness of the cut piles 180 mm
- Minimum thickness of cut piles of 20 mm
- Max. flitch cut width 400 mm
Max. number of circular saws:
1. Spindle bottom 10 pcs
2. Spindle top 10 pieces
- Diameter 60 mm Spindle
Motor power drive circular saws:
1. Spindle top 11 ÷ 30 kW
2. Spindle bottom 11 ÷ 30 kW
- Run the engine power saws 2900 rpm
- Turnover shaft saws 3800 r / me
- Feed drive motor power 1.1 kW
- Run the engine feed drive 1450 rpm
- Feed speed range 0 ÷ 15 m / min
- Power supply 3 x 400V, 50Hz
- Performance machine to 5 m³ / h
- Noise emissions below 95 [dBA]
- Dimensions (L x W x H) 1400 x 1150 x 1540 mm
- Weight of machine 1650 kg
CE Certificate
|
|
|
Circular Frame Saw TT-400
Circular Saw TT-400 is used for sawing round wood
dimensional average diameter max. 380mm on piles and planks of varying
thicknesses. Length of wood depends on the length of the applied
feeding table, which forms an integral part of the machine and is
performed, depending on customer needs. The machine can be used
in small and medium-sized, and even in large plants of timber industry.
The principle of Chainsaws
Saw is designed to achieve the most efficient cutting
conditions. For this purpose, in the body of the machine mounted
two sliding panels, motor, which placed the two engines equipped
with a spindle. In this way, You will be able to make very quick
and easy changes in the thickness of the cut piles without dismantling
the central saws.
By applying the mechanism to change the position of the table in
a vertical line, given the opportunity to increase in the efficiency
of the machine. Through this mechanism, and attaching directly to
the spindles, saw placed on the motor shafts (no transmission belt)
also achieved a significant reduction in electricity consumption.
The table was placed on a special steel that it moves in the direction
of cutting saws. Placed directly behind saws cutting wedges protect
the material before the contortions and the unexpected discharge
of waste of wood.
Specifications
- 500 mm diameter circular saw blades
- Max. 380 mm diameter cut material
- Min. 100 mm diameter cut material
- Max. 160 mm thickness of the central prism
- Min. 60 mm thickness of the central prism
- Max. amount of saws on the 2 pieces on each engine
- Engine power: 4 pcs. x7, 5 kW
- Engine speed 1450 obr.min.
- Feed drive motor power 1,1 kW
- Feed drive motor speed 1450 obr.min
- Speed range 0-12m/min feed.
- 3x400 W power supply, 50Hz
- Performance of a machine 10m3/h
- Discharging sawdust 2x150mm
- Sound pressure level in the workplace 92.6 ± 1.8 [dBA]
- Sound power level of 103.8 ± 1.0 [dBA]
- Overall dimensions (L x W x H) 6000x1400x1700 mm
- The weight of machine 1250 kg
CE Certificate
|
|